Indicators come on/blink depending on the condition of the vehicle. Messages may be displayed at the same time. Please take the appropriate action outlined in the message, such as having your vehicle checked by a dealer.

If a message is displayed saying the vehicle cannot be driven, immediately stop in a safe place and contact a dealer.

Comes on when the parking brake is applied, and goes off when it is released.

Comes on when the brake fluid level is low.

1. Depress the brake pedal lightly to check pedal pressure.
2. If normal, check the brake fluid level the next time you stop.

   Checking the Brake Fluid

3. If abnormal, take immediate action. Pull the − paddle as many times as needed to help slow the vehicle using regenerative braking. Or, if the drive mode is in SPORT or BOOST mode, pull back on the − paddle to decrease the gear level.

1. Have your vehicle repaired immediately. It is dangerous to drive with low brake fluid. If there is no resistance from the brake pedal, stop immediately in a safe place. If necessary, pull the − paddle as many times as needed to help slow the vehicle using regenerative braking.
   Or, if the drive mode is in SPORT or BOOST mode, pull back on the − paddle to decrease the gear level.

Comes on if there is a problem with the brake system.

1. If the Parking Brake and Brake System Indicator (Red) and Parking Brake and Brake System Indicator (Amber) come on simultaneously, the braking system may be less effective than usual. Make sure to depress the brake pedal firmly. Immediately stop in a safe place and contact a dealer.
2. If the Parking Brake and Brake System Indicator (Red) and ABS indicator come on simultaneously, the electronic brake distribution system is not working. This can result in vehicle instability under sudden braking. Have your vehicle inspected by a dealer immediately.

Blinks if there is a problem with the electric parking brake.

1. Do not use the parking brake.
2. Put the transmission into P to prevent the vehicle from moving, as the parking brake may not work.

1. If the Parking Brake and Brake System Indicator (Red) blinks at the same time when the Parking Brake and Brake System Indicator (Amber) comes on, the parking brake may not work. Avoid using the parking brake and have your vehicle checked by a dealer immediately.

Comes on if there is a problem with a system related to braking other than the conventional brake system.

Comes on if there is a problem with the electric parking brake system and/or the automatic brake hold system.

1. Do not use the parking brake.

Comes on when there is a problem with the charging system.

Comes on or blinks when any seat belts are unfastened.

1. Securely fasten seat belts immediately.

   Seat Belt Reminder

1. Comes on or blinks for a while if any rear passenger unfastens their seat belt. Turns off momentarily.
2. If this indicator stays on after you and/or the passengers have fastened the seat belt(s), a detection error may have occurred in the sensor. Have your vehicle checked by a dealer.
3. You can check whether each seat belt is fastened on the driver information interface.

   Switching the Display

Comes on if a problem with the airbag system or seat belt tensioners is detected.

About Your Airbags

Comes on if there is a problem with the electric vehicle system or plug-in charging system.

Comes on if there is a problem with the ABS.

1. With this indicator on, your vehicle still has normal braking ability but no ABS function. This can result in vehicle instability under sudden braking, so avoid situations such as motorway driving.

Blinks when VSA is active.

Comes on if there is a problem with the VSA system, hill start assist system, or agile handling assist.

1. With this indicator on, your vehicle still has normal braking ability.

Comes on when you partially disable VSA.

Vehicle Stability Assist (VSA) System

Comes on if there is a problem with the EPS system.

1. Stop your vehicle in a safe place. If this indicator stays on after restarting the power system, take your vehicle to a dealer for an inspection immediately.

Blinks if there are obstacles around the sensors.

About Parking Sensor System

Comes on if the tyre pressure of any of the tyres becomes low.

1. Stop in a safe place, check tyre pressures, and inflate the tyre(s) if necessary.

If this indicator stays on after blinking, there is a problem with the TPMS.

Tyre Pressure Monitoring System (TPMS)

Blinks if the transmission system has a problem.

Blinks if you cannot select P due to a transmission system failure.

1. Set the parking brake when parking.

1. Depending on the situation, you may not be able to turn on the power system.

Comes on if there is a problem with ACC with Low Speed Follow.

1. Comes on if the vehicle is tilted due to heavy load in the luggage area or rear seats.

Comes on if there is a problem with the LKAS.

1. LKAS and Traffic Jam Assist cannot be used.

1. Comes on if the vehicle is tilted due to heavy load in the luggage area or rear seats.

Comes on if there is a problem with the CMBS or it cannot be used temporarily due to issues such as dirt on the windscreen near the camera.

1. The Safety Support Indicator (Amber) will come on at the same time.

   Safety Support Indicator (Amber)

Comes on if there is a problem with the Road Departure Mitigation System or it cannot be used temporarily due to issues such as dirt on the windscreen near the camera.

1. The Safety Support Indicator (Amber) will come on at the same time.

   Safety Support Indicator (Amber)

Comes on when the Road Departure Mitigation System steering assist is automatically turned off.

About Road Departure Mitigation System

Comes on if there is a problem with any of the safety support systems.

Safety Support

1. Comes on if the vehicle is tilted due to heavy load in the luggage area or rear seats.

Comes on if there is a problem with the parking sensor.

1. Check if the area around the sensor(s) is covered with mud, ice, snow, etc.

   About Parking Sensor System

Comes on when driver assist system functions are limited because the camera’s temperature is too high.

Front Wide View Camera

Comes on when driver assist system functions are limited because of poor camera visibility due to poor weather, such as rain, fog, snow, or dark surroundings, such as in early morning, late evening, or the inside of a tunnel at night.

1. Comes on when the area around the camera is covered by obstacles.

   Front Wide View Camera

Comes on when the Low Speed Braking Control System’s functions are limited because the sonar sensor is covered by obstacles.

Sonar Sensors

About Low Speed Braking Control