Replacing the Remote Battery

If the indicator does not come on when the button is pressed, replace the battery.

Replacement batteries are commercially available or at a dealer.

A warning markis located adjacent to the button battery*.

WARNING

CHEMICAL BURN HAZARD

The battery that powers the remote transmitter can cause severe internal burns and can even lead to death if swallowed.

Keep new and used batteries away from children.

If you suspect that a child has swallowed the battery, seek medical attention immediately.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 

CAUTION: Do not exposed to excessive heat such as sunshine, fire or the like, that can result in an explosion or the leakage of flammable liquid or gas during use, storage or transportation. 

CAUTION: Do not dispose of a battery into fire or a hot oven, or give mechanically crushing or cutting of a battery, that can result in an explosion. 

CAUTION: Do not subjected to extremely low air pressure at high altitude that may result in an explosion or the leakage of flammable liquid or gas.

An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.

This symbol on the battery means that this product must not be treated as household waste.

Keyless Remote

  1. Remove the built-in key.
  1. With the buttons facing down, remove the upper half of the cover by carefully prying on the slot with the key grip.
    1. Wrap a key grip with a cloth to prevent scratching the keyless remote.
    2. Remove carefully to avoid losing the buttons.

  • Battery

  1. Make sure to replace the battery with the correct polarity.

Battery type: CR2032

  1. Wrap a flat-tip screwdriver with a cloth to prevent scratching the keyless remote.

*: Not available on all models