Turn on Power System
- Make sure the parking brake is applied
- Depress the brake pedal, then press the POWER button while the shift position is in P.
- The READY indicator (
) comes on when the power system is on and you can start driving. - Keep depressing the brake pedal until the indicator comes on.
- If the outside temperature is extremely low, the indicator does not come on and a warning message appears on the gauge.
- The READY indicator (
- Keep your foot firmly on the brake pedal when starting the power system.
- When turning on the power system in cold weather, turn off all electrical accessories such as the lights, climate control system, and rear demister in order to reduce the 12-volt battery drain.
- Do not hold the POWER button to turn the power system on. If the power system does not start, wait at least 30 seconds before trying again.
- The power system may not activate if the keyless remote is subjected to strong radio waves.
- The immobilizer system protects your vehicle from theft. If an improperly coded device is used, the power system does not activate.
- If the power system temperature is low, the message “High voltage battery too cold. Power may be reduced. Avoid strong acceleration and high speed.” may be displayed. This message will disappear once the power system temperature returns to a normal range. If the message does not disappear, have your vehicle checked by a dealer.
To prevent unexpected accidents, do not depress the accelerator pedal when turning on the power system.