The power windows can be opened and closed when the power mode is in ON, using the switches on the doors.

The driver’s side switches can be used to open and close all the windows. The power window lock button on the driver’s side must be switched off to open and close the windows from anywhere other than the driver’s seat.

When the power window lock button is pushed in, the indicator comes on and you can only operate the driver’s window.

Manual operation

To open: Push the switch down lightly, and hold it until the desired position is reached.

To close: Pull the switch up lightly, and hold it until the desired position is reached.

Automatic operation

To open: Push the switch down firmly.

To close: Pull the switch up firmly.

The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.

1. The power windows can be operated for up to 10 minutes after you set the power mode to VEHICLE OFF.
2. Closing the driver’s door cancels this function.

Auto Reverse

1. If a power window senses resistance when closing automatically, it will stop closing and reverses direction.

If the auto reverse function is activated due to a malfunction or impact caused by the road surface or driving conditions and the window cannot be closed automatically, you can close it by continuously pulling up the switch briefly.

1. The driver’s window auto reverse function is disabled when you continuously pull up the switch.
2. The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.

WARNING: Always take the ignition key with you whenever you leave the vehicle alone or with other occupants.